news & press

Pneumatic coil nailers are a must-have tool for any professional carpenter or DIYer looking to increase productivity on the jobsite. These nail guns use compressed air to rapidly drive nails into wood, allowing you to frame walls, build decks, and complete other carpentry projects much faster.

What Are Pneumatic Coil Nailers?

Pneumatic nailers are power tools that use compressed air to rapidly drive nails. Most models connect via an air hose to a compressor that provides 70-120 PSI of pressure. The nailer has a magazine or coil filled with collated nails - nails held together on strips or wires for fast reloading. When the trigger is pulled, a piston fires to drive the nail into the workpiece with immense force.

Coil framing nailers specifically use angled nails ranging from 2 to 3.5 inches long. The nails are coiled on reels inside the tool for hundreds of shots before reloading. The angled magazine fits flush on wall studs for toenailing, while the nose can reach into tight corners. Most models weigh under 10 pounds for easy all-day maneuvering.

Why Use a Pneumatic Coil Nailer?

These tools can drive multiple nails per second, allowing you to quickly tack framing lumber into place. Rather than slowly hammering each nail individually with a traditional hammer, you can rapidly zip them into the wood as you move down the frame. The boost in efficiency is especially noticeable when doing large repetitive tasks like framing walls or assembling roof trusses.

The compressed air delivers consistent force to sink nails deep into dense materials like engineered wood and concrete. This power allows you to use longer, more secure nails without the need to pre-drill holes. The depth at which nails are driven can be precisely adjusted to prevent over-penetration and splitting. For heavy duty nailing applications, a coil nailer is the clear choice over lighter-duty nail guns.

Loading nails into a coil framing nailer takes just seconds, thanks to their unique magazine design. Rather than fussing with strips of nails that have to be lined up just right, you simply drop a pre-coiled ring of nails into the magazine and you're ready to start driving. The nail coil feeds automatically as you work, delivering a non-stop supply of fasteners until the coil is empty. Reloading just means popping in a new ring. It doesn't get much easier than that!

You’ll also have better control over nail placement with a coil nailer’s single-shot operation. Nails are fired only when the nosepiece is depressed against the workpiece, giving you time to properly position the tool. Precision nailing helps ensure strength and aesthetics in your finished product. Additionally, dry-fire lockout mechanisms prevent the tool from discharging a nail if you accidentally pull the trigger without adequate pressure on the nose. This control over nail firing improves safety on the jobsite.  

Most pneumatic coil nailers today use convenient coil nailer loads that hold up to 300 nails before reloading. This means less downtime reloading nails and improved productivity. The high nail capacity of today's coil nailers lets you drive hundreds of nails quickly before stopping to reload. That translates to getting more done in less time.

If you do any type of carpentry, especially framing, decking, fencing or other construction work, RONGPENG MCN90 pneumatic coil framing nailer is one of the wisest option you can make.

Trigger lock-off allows trigger to be disable when not in use. Sets nails properly every time with a tool-free depth of drive with detents. Available with either sequential and contact fire triggers, bump firing mold for fast fastening.

Use 15 degree 1-3/4" to 3-1/2" wire collated nails. Delivers the power to consistently drive nails in the toughest applications.

Model:MCN90

Dimension:376*356*132mm

Weight:4.25kg(9.35b)

Required pressure:90-110PSI(6.1-7.5bar)

Max.pressure:120PSI(8.3bar)

Nail Capacity:225pcs

RONGPENG has quickly risen to become an unrivaled global producer of air-powered devices including air tools, air spray gun, air nailer, airless paint sprayer, and etc.

RONGPENG seeks independent sales agent to represent and market our industry-leading pneumatic tools. We support OEM, ODM, OBM customization, small order quantity is acceptable and samples are available.

Make any cooperation possible. Any services related to the product, inquire with us now! Rongpeng@Rongpeng.Com