The RONGPENG air-powered impact wrench features Impact of job security, free from vibration, heat, electromagnetic, etc, segmented in take structure design, handing more accurate. tool has the appearance of new, large torque, low noise characteristics. knob to change the structure, the forward rotation and reverse rotation easily manipulated, high alloy steel, ensuring a more durable wear, greatly extend the service life. Best used for tire rotation, brake repairs, exhaust repairs, mechanical equipment bolt etc.
Compatible compressor and air tool:
GUIDELINES FOR PROPER USAGE AND POERATION
Always ensure the use of appropriately matched air tools and compressors. The compressor should be able to supply a minimal air delivery of 6.5 SCFM@90PSI to ensure the compressor can run continuously with the AEROPRO Air-Powered Impact wrench. Using tools or a combination of tools that together or separately require air pressure more than that of which the air compressor can deliver will reduce performance and could void the compressor or tool guarantee/warranty.
Air compressor size & power | 2HP | 2-1/2 HP | 3+ HP |
5-6 Gallons | Light duty and intermittent use | Light duty and intermittent use | Medium duty and intermittent use |
8-11 Gallons | Light duty and intermittent use | Medium duty and intermittent use | Heavy duty and continuous use |
15+ Gallons | Medium duty and intermittent use | Heavy duty and continuous use | Heavy duty and continuous use |
Loading and operation
l Carefully read all instructions provided in this manual and understand them thoroughly before using the tool.
l Do not use Impact wrench accessories other than those that are specifically designed for use with the Air-powered impact wrench. Failure to comply will result in serious injury or loss of life.
l Verify that the air supply is clean before operating the Air powered impact wrench.
1. Plug in compressor, turn it on set the pressure regulator to 90psi, attach one end of the air hose to the compressor and the other end of the air hose to the tool. Use plumber’s tape to avoid air leak ( see section” Technical specifications”).
2. Place and lock the socket over the square drive of the Air-powered impact wrench.
.png)
3. Place the socket over a nut to be removed or installed and press the trigger at the top of the handle to operate the tool.
.png)
4. For reverse rotation, press the speed control knob on the left side of the tool; For forward rotation, press the speed control knob on the right side of the tool; Rotate the speed control knob on the left side of the tool during reverse rotation to control the speed of the air flow as required. Rotate the speed control knob on the right side of the tool during forward rotation to control the speed of the air flow as required.
.png)
5. After using the tool, disconnect the air hose from the tool.
.png)
video
https://rongpeng.store