Chat with us, powered by LiveChat
Home / all news & press /

How To Paint Your House’s Exterior With An Airless Paint Sprayer

date
2024/01/03


Applying a fresh coat of paint to your home's exterior can really transform its appearance. An airless paint sprayer is the tool to make painting the exterior of your house much simpler. We'll get into the essentials of using an airless sprayer for painting your house's exterior.

 

Why an Airless Sprayer?

 

Several benefits make airless sprayers ideal for exterior painting.

 

Efficiency: Reducing the project's overall duration by half or more. This is especially true for large surfaces like siding and cladding.

 

Professional Finish: With proper technique, an airless sprayer can deliver a even coat of paint, get the professional finish achieved by painters.

 

Improved Reach: Nooks and crannies, like eaves and soffits, become easily accessible with a sprayer's extension wands.

 

Choose the Right Paint

 

When painting the exterior of your home, you’ll want to use exterior paints formulated for withstanding the elements. For wood siding, use exterior acrylic latex. For stucco, choose an elastomeric acrylic paint which flexes without cracking or peeling.

 

Oil-based paints are not recommended for exterior house painting as they become brittle and prone to peeling over time when exposed to sun and weather. Buy enough paint to complete the whole job and get all your paint from the same batch so colors will match exactly.

 

Prepare for Overspray

 

No matter how careful you are, some amount of paint drift is inevitable when spray painting outdoors. Cover or mask off anything you don’t want painted - windows, doors, light fixtures, plants and more. Drop cloths also help protect patios, plants and other surfaces from the fine paint mist.

 

Set Up the Sprayer

 

Fill the paint container about halfway with well-stirred paint. Attach the hose, gun and tip assembly according to directions. Make sure all connections are tight. Place the inlet filter into the paint bucket.

 

Adjust the pressure to the PSI listing on the tip you’ll be using or slightly lower. Turn the pressure control knob counterclockwise to reduce pressure if needed. Attach an extension to the gun handle if painting high exterior walls and peaks. Load the paint into the system by turning the prime valve until paint flows evenly from the gun. Spray into a container until it flows smoothly without bubbles.

 

Paint with a System  

 

When painting the house, it helps to work in sections using a systematic technique. Begin at the top of the house above the eaves. Work across the surface using horizontal strokes about 10-12 inches long, slightly overlapping each pass. Continue spraying side to side, working your way down the wall, maintain a consistent distance from the surface as you spray. Allow the paint to fully dry before applying a second coat, following the same systematic technique.

 

Apply Multiple Coats

 

For best results, two coats of exterior paint are recommended. Allow the first coat to dry fully before adding the second coat. Adding a second coat provides better paint coverage and durability. Inspect the first coat and touch up any thin spots before applying the final coat. The colors should look richer and the paint will better withstand weathering after two coats are applied. Don’t skimp on applying multiple coats when painting the exterior of your home.

 

Choosing the Right Airless Sprayer

 

For most homeowners, RONGPENG RP8628 Airless Paint Sprayer will be sufficient. Quickly coat large areas with a professional finish using the RP8628. It delivers the power and performance needed for big exterior painting projects. 

The new circuit control makes the voltage more stable. 818C high pressure metal airless spray gun with 15M hose. Compact structure, small and light. Easy to disassemble the suction tube, easy to maintain and clean. The sealing ring is super wear-resistant. Economical and practical, cost-effective. 

 

Widely used in the coating of ships, rolling stock, chemical equipment, steel structures, small and medium-sized interior and exterior walls, commercial and industrial buildings.

 

Voltage/Frequency:220V/50Hz or 120V/60Hz

Max Pressure:3000Psi,20.7Mpa

Standard Nozzle Size:517(0.017")

Motor Power: 1.27HP,950W

Max.Pressure For The Hose:83Mpa

Length Of High Pressure Hose: 15 M

Flow Rate: 2.0±10% Lpm

Net. Weight: 11kgs, 24.2Lbs


RONGPENG has quickly risen to become an unrivaled global producer of air-powered devices including air tools, air spray gun, air nailer, airless paint sprayer, and etc.

RONGPENG seeks independent sales agent to represent and market our industry-leading pneumatic tools. We support OEM, ODM, OBM customization, small order quantity is acceptable and samples are available.

Make any cooperation possible. Any services related to the product, inquire with us now! Rongpeng@Rongpeng.Com