Check the surface quality and cleanliness before painting. Before painting the car, the tools used in the construction, such as brushes, Rongpeng spray guns, paint buckets, stirs, etc., must be kept highly clean, and must not be contaminated with oil, dust, water marks, and old paint Substances that are contaminated with paint fluids. The surface quality of the car before painting must meet the specified process standard: the whole car table

Third choice of matching paint materials

When inspecting the quality of paint materials and choosing supporting materials for car painting, it is necessary to consider from many aspects: after the completion of the car product, most of the working time is outdoors, and the car paint layer must have higher protection and more Nice decoration. Therefore, it is necessary to choose high hardness, high gloss, bright colors, weather resistance, heat and humidity resistance, salt spray resistance, mildew resistance and other good performance. The choice of supporting system should be different with the main requirements of the purpose of painting. Various paints have different matching requirements, and the following two conditions must be met when considering: ① There should be good binding ability between the primer and the topcoat ② The primer and the topcoat should be adapted, that is, they must be compatible with each other.

The fourth color mixing paint and paint mixing

Dilute filtration If you need to adjust the color before construction, try a small amount of samples first. After meeting the standard color plate, expand the mix according to the proportion of the trial adjustment. You should master the gap between the wet and dry samples based on experience.

Fifth shield protection

When use Rongpeng hvlp spray gun to painting a car, most of the paint materials contain various volatile solvents that are harmful to the human body. When the concentration of these solvents is high, the nerves of the solvent have a serious stimulating and damaging effect on the human nerves, which is easy to cause poisoning. Therefore, the workplace must have good ventilation, lighting, dust removal, anti-virus equipment, and wear a variety of protective equipment, such as work clothes, gloves, masks or gas masks and protective glasses.

In the world, which countries are manufacturing impact wrench manufacturers, maybe you would say Zhejiang, China, Taiwan, China, the United States, Germany, etc., but which region do you prefer to use? With the development of technology, the difference in quality may be getting closer, but the money paid is still different. Take the impact wrench made by Rongpeng Air tools in Zhejiang, China. The quality has been greatly improved, and you can pay less than 25 %, this is my opinion, welcome to show your opinion?